AC100-CPT load bank
100 kW AC 3-phase or 1-phase
Key features
Light weight, compact load bank providing 100kW of load capacity, power metering and data logging.
Ultra portable
The high power density of this load bank results in a construction that, at only 30kg, can be transported easily.
In addition, the included case with castors and pull handle further enhances manoeuvrability and provides protection when in storage.
Quick setup
Easy connection to the supply under test using Powersafe connectors.
The power connections are located away from the control panel so that operators can stand comfortably in front of the load bank without risk of tripping on cables.
Data logging
The included power meter displays real-time measurements on an LCD screen and simultaneously logs the test data which can be later downloaded over the panel mounted USB socket.
Industrial reliability
The innovative cross-wire coil elements are light and durable, proven in braking applications for locomotives and mining trucks.
Technical specification
Ratings
Suitable for frequencies of 50Hz or 60Hz. Other voltages and frequecies available on request.
3-phase
Voltage 400V AC
Maximum load step resolution 6.25 kW
Max. capacity 100.0 kW
1-phase
Voltage 230V AC
Maximum load step resolution 2.08 kW
Max. capacity 33.3 kW
Control and Ventilation
Manual controls
1 x supply source rotary selection
2 x on/off push buttons for cooling fans and master load enable function
6 x on/off rotary selector switches for load sections
Emergency stop
Control interface
Manual control (described above)
Power meter with LCD display
Temperature fault LED
Cooling Forced convection, horizontal orientation
Fans 8 x DC axial type
Noise 86dB at 1m
Control supply 230Vac 1-phase 50Hz
Source Internal (supply under test) or external supply (recommended)
Connection Interfaces
Load connections
4 x Powersafe sockets (3P+N)
1 x PE M12 stud connection
External control supply 1 x C14 socket (L+N+PE)
Data 1 x USB Type A
Operating Environment
Suitable for indoor use only
Ambient temperature 5°C to 40°C
Ingress protection IP21
Construction
Resistor elements Wire coils
Element material Stainless steel
Enclosure Aluminium, RAL9002
Portability
1 x lifting handle
1 x wheeled transport case with extendable pull handle
Weight and Dimensions
Load bank only
Length 565mm
Width 308mm
Height 718mm
Weight 30.0kg
In carry case
Length 725mm
Width 416mm
Height 856mm
Weight 47.0kg
Safety
Electrical protection
Over current and short circuit fuse protection
Thermal protection
Thermostat cut-out
Fan current monitoring relay
Optional extras
Supply cables made to order to the desired length and with supply side connection method to suit the intended use
Data download cable USB data cable to connect your load bank to standard USB type-A socket and download recorded power data.
Downloads
Technical data sheet PDF