Discover Our Products
Our towel rails
FloBar Model 1:
Form
FloBar Form is a classical bar design that can be configured by number and layout of hanging bars, along with the style and ideal surface finish for your interiors.
Form - A Classical Bar Design
Form can be specified in 2 to 5 hanging bars and in two widths of 500mm or 600mm.
Form
Standard In Brushed Copper
Form
Mitre In Brushed Stainless
Form
Ball Joint In Antique Copper
Form
Flat In Brushed
Nickel
When specifying a combination of two kits or more, an in-line connection kit will also be required.
Your kit will consist of the following:
- Manifolds
- 1/4” BSP to 10mm push fit cylinder connectors + pipe inserts
- 10mm Flexible barrier pipe
- FloBars (x1 with air vent)
- FloBar connection plates
- FloBar cover plates
- FloBar valves + cover plates
Kit number | Bars in kit (Tube Ø 32mm) | Output Δ T50°C Watts/BTU’s |
FBFM-FE 1002BR0500 | 2 | 48 / 164 |
FBFM-FE 1003BR0500 | 3 | 72 / 246 |
FBFM-FE 1004BR0500 | 4 | 96 / 328 |
FBFM-FE 1005BR0500 | 5 | 120 / 409 |
FBFM-FE 1002BR0600 | 2 | 58 / 198 |
FBFM-FE 1003BR0600 | 3 | 87 / 297 |
FBFM-FE 1004BR0600 | 4 | 116 / 396 |
FBFM-FE 1005BR0600 | 5 | 145 / 495 |
FloBar Model 2:
Flux
FloBar’s second model is a less classical bar, which is open on one side. This open feel also allows towels to be placed on and off the heat from the side of the design.
FloBar Flux is a contemporary bar design that can be configured by number and layout of hanging bars, with the same ideal finishes for your interiors.
Flux - A Contemporary Bar Design
Flux can be specified in 2 to 5 hanging bars and in two widths of 550mm or 650mm.
FLUX
Original in
brushed brass
Flux
Mitre in
polished chrome
FLUX
Ball joint in
polished brass
Flux
Flat in
brushed copper
When specifying a combination of two kits or more, an in-line connection kit will also be required.
Your kit will consist of the following:
- Manifolds
- 1/4” BSP to 10mm push fit cylinder connectors + pipe inserts
- 10mm Flexible barrier pipe
- FloBars (x1 with air vent)
- FloBar connection plates
- FloBar cover plates
- FloBar valves + cover plates
Kit number | Bars in kit (Tube Ø 32mm) | Output Δ T50°C Watts/BTU’s |
FBFX-FE 2002BR0550 | 2 | 48 / 164 |
FBFX-FE 2003BR0550 | 3 | 72 / 246 |
FBFX-FE 2004BR0550 | 4 | 96 / 328 |
FBFX-FE 2005BR0550 | 5 | 120 / 409 |
FBFX-FE 2002BR0650 | 2 | 58 / 198 |
FBFX-FE 2003BR0650 | 3 | 87 / 297 |
FBFX-FE 2004BR0650 | 4 | 116 / 396 |
FBFX-FE 2005BR0650 | 5 | 145 / 495 |
Included in the kit
A breakdown of
what's in the box
The FloBar system includes the manifolds required to direct the water around the towel bars, complete with all the components that you’ll need to connect your “FloBars” to your heating system.