PL-12000DP/DPS
BendPak’s newest PL-12000DP and PL-12000DPS parking lifts are revolutionary vehicle storage solutions for those challenged with owning more cars and trucks than parking spaces to store them. They can greatly expand the number of cars in a facility without expanding building space. As the costs of commercial and residential development increase, gaining additional parking spaces in the same usable space provides instant value. These mechanical parking systems are designed to increase parking density and cut costs over traditional parking methods.
Two Independent Platforms
Because each platform operates independently, one vehicle can be lowered while the other side remains still. This eliminates the need to “shuffle” vehicles from the half of the lift where vehicles are not being accessed.
Still the Best
For over 50-years, our experience as the world’s premier parking lift manufacturer enables us to deliver optimal solutions for our clients, from the initial problem, design consultation, then ultimately through fabrication, installation, and support. We’re the leading turnkey provider for all your parking lift needs, whether for commercial garages, or residential applications.
The cutting-edge PL-12000 series lifts reflect our continuing commitment to design and deliver innovative vehicle storage solutions that offer only the highest value to our customers. The space-saving design means you can now stack one vehicle above another in the same space typically required for a single parking stall. With the strength to handle loads up to 6,000 lbs. and a footprint considerably smaller than other mechanical parking systems, they deliver more parking capability space per square inch than any other lift in its class.
Reliable and Safe
A dependable hydraulic drive system provides reliable power that requires very little service and maintenance over time. Tandem drive cylinders, combined with an intelligent hydraulic circuit, provide precise, equalized lifting of the platforms. Our promise to deliver a safe parking lift is the most important commitment we make in order to earn your trust and ensure lock systems and easy to understand operator controls, operators will be pleasantly surprised at how easy they are to safely operate.
Our commitment to quality is unsurpassed. Our dedication to taking your parking challenges to the next level extends well beyond the physical reach of our products. Our advanced yet simple design enables our lifts to perform effortlessly and tirelessly, year after year, with very little maintenance or service required. After all, we can’t expect you to be a parking lift expert – that’s our job. Featuring rugged, welded steel construction, very few moving parts, and a simple fluid power system, the hydro-mechanical PL-12000 series offers the most economical and dependable method of lifting to deliver you many years of trouble-free service.
Performance Guaranteed
We’re so sure that our lifts will out-perform all others; we’re backing that promise with a full five-year warranty. The best warranty is the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability, and reliability.
• Dual hydraulic cylinders with heavy-duty galvanized lifting cables
• Multiple locks for multi-height parked settings
• Wide baseplates for maximum stability
• Dual electric-hydraulic power units
• Heavy-duty steel construction
• Front and rear wheel chocks
• 6,000 lb. capacity per side
• Built-in wheel stops
• High-speed lifting
• Tall rise, extended length model - PL-12000DP
• Perfect for cars, light trucks, motorcycles, and ATVs
• Superstructure features durable powder-coat finish
• Full-width platforms to keep bottom vehicles protected
• Lightweight, extended aluminum approach ramps can be easily stowed
Style
Style:
Multi-Platform Parking Lift
Model
PL-12000DP
Number of Platforms
2
Load Capacity per Platform
6,000 lbs. / 2,722 kg
Total Width
221.25" / 5,620 mm
Outside Length
198" / 5,029 mm
Total Length
242.5” / 6,160 mm
Total Height
130.5” / 3,313 mm
Min. Runway Height
4.75” / 121 mm
Maximum Rise
82” / 2,082 mm
Width Between Posts
211” / 5,362 mm
Width Between Short & Double Posts
100.25” / 2,546 mm
Width Between Platforms
29” / 739 mm
Width Between Runways
35” or 41” / 887 or 1,045 mm
Runway Length
183” / 4,649 mm
Runway Width
19” / 482 mm
Drive Thru Height
80.5” / 2,047 mm
Drive Thru Width
85” / 2,161 mm
Outside Edge of Runways
76 or 82” / 1,930 or 2,083 mm
Safety Lock Positions
6
Power Unit / Motor
220 VAC, 50/60 Hz, 1 Ph -*Other voltages, including 110V option are available upon request. All specifications subject to revision.
Note: An air supply (minimum of 75 PSI). is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
BendPak Sites
User Manual 